heres photos of my proto 1212. https://image.ibb.co/kKWDnd/20151116_203349.jpg this photo below is an outdated photo of my collection https://preview.ibb.co/b4Hsfy/1499520_10201120432682001_290482038_n.jpg https://preview.ibb.co/fu9zSd/20180306_164339.jpg heres the radio out of the thing https://pre...

I never realized until just this very second that the caps on those 115s are nothing more than Model 5 caps. I've been on these boards for how long and I'm just seeing a little something like that... i can rest assure you there not model 5 caps, i have 5s in my collection and one of these proto 121...

Just a curious question that i have, do you have a jumper in between 15 &16? it has to have one there if there is no siratrol radio present, the radio made the connection between those two for the cancel circuit when it was wired for a siratrol. hence why the timer only cycles when you have the ...

i own majority of the elmwood place 1000t just for a heads up. here is a picture of it before it was removed by werden and bought by me.. http://i67.tinypic.com/2dhs0mr.jpg here is the siren head in my garage. i have a blower for the siren but i did not take the original one in the picture above.. ...

i own majority of the elmwood place 1000t just for a heads up. here is a picture of it before it was removed by werden and bought by me.. http://i67.tinypic.com/2dhs0mr.jpg here is the siren head in my garage. i have a blower for the siren but i did not take the original one in the picture above.. i...

congratulation's on winning that thunderbolt, i was bidding on it just for parts but got outbid and said screw it after it got over a 100$, as the seller was going to resell the rest of the siren anyway. have fun with your bolt. there nice to have.

I have a picture that i saved from out in the wild of a 480v RCM panel, its a mid 1950s model that has been semi butchered and some of the contactors have been changed out. Note the massive chopper transformer inside it. http://i705.photobucket.com/albums/ww55/arcaderepairlouisville/14572270_1020715...

hey calvin, the chopper motor is single phase and can operate on anything from 120-240v ac. your rotator motor is the only thing that is three phase... if you dont have the blower. a RCM is not required to run it but if you want to adjust chopper pitch it will be needed. change the rotator motor out...

Hey adam... the tone modules for the full chime sequence are marked with the A1. I could have sworn that the UTM did the full melody but i guess not. keep looking and im sure you'll find one. i will get you the pinouts when i find the extra time to do so.

Glad you asked adam. From the factory the sirens did not come with the module pre-installed in the controller unless you requested it to be. The TM control modules when ordered could be requested for a full or half step chime melody. the rev a. modules are a bit harder to find now a days as they wer...