Page 6 of 7
Re: Siren parts
Posted: Tue Dec 27, 2016 7:43 am
by Stormsetter4
The chopper motor brushes in a Thunderbolt are the same as the collector ring brushes. A Model 2 and a Thunderbolt chopper assembly are the exact same thing, no differences motor-wise
Re: Siren parts
Posted: Wed Jan 18, 2017 11:23 pm
by QuantumCurse
The brushes I listed up here have springs that a tad bit big for the housing for them.
Re: Siren parts
Posted: Sun Oct 15, 2017 5:57 pm
by Atiblaster
Does anyone have a spare Model a front cone, if so, please respond!!! Also if there is also a model a stator, that would also be greatly appreciated!
Re: Siren parts
Posted: Thu Mar 01, 2018 3:00 pm
by QuantumCurse
Hate to bump this but does anyone know where I can get brushes for a 3T22? I believe the motor is the Northwestern Electric version. The ones I have are completely worn out. Thanks!
Re: Siren parts
Posted: Fri Mar 02, 2018 8:42 pm
by SoundMaster 391
QuantumCurse wrote: ↑Thu Mar 01, 2018 3:00 pm
Hate to bump this but does anyone know where I can get brushes for a 3T22? I believe the motor is the Northwestern Electric version. The ones I have are completely worn out. Thanks!
You could try and ask CDV777-1 here on TheSirenBoard. I remember back in 2009 he received a ton of NOS Federal Signal parts including brushes for the single phase repulsion induction motors. I'm not sure if he still has any parts left but it's worth a shot.
Re: Siren parts
Posted: Thu Mar 22, 2018 4:17 am
by Josh
Curious if anyone knows where I can find the push buttons used on the AR/AF timer?
Re: Siren parts
Posted: Wed Jan 30, 2019 12:45 am
by Train Fan
Anyone have an armature or motor for a single phase 2T22B? A local fire co is looking for parts.
Re: Siren parts
Posted: Wed May 13, 2020 2:30 am
by jacob585
Anybody know what type of driver a University Speakers Model SAH speaker uses and where I can get one?
Re: Siren parts
Posted: Mon Mar 08, 2021 4:52 am
by AlertronicPig
Sorry for bumping the thread, but does anyone know what driver the Alertronic uses?
Re: Siren parts
Posted: Tue Mar 09, 2021 3:38 am
by FSThunderboltfan1000
AlertronicPig wrote: ↑Mon Mar 08, 2021 4:52 am
Sorry for bumping the thread, but does anyone know what driver the Alertronic uses?
The Alertronic used the Atlas SD-370, those have since been discontinued, but I believe you can still get replacement diaphragms for them. If you are looking for something new they now make an AS-100N, but they are a bit pricy. ASC currently uses DKTec DKU-100N for their electronic sirens.