Castle Castings 10/12 port stator and rotor repair ? and parts of the early warning system

[thebreadmister]

Hi all.. i was just wondering if anybody would know here.. where to get both stators and rotors of a castle castings siren repaired at ?.. as currently i have no clue where to go with them to get them repaired/repainted a little and put back into shape.. any help would be appreciated ?... also wanted to show the early warning wb1401 and WB1400 speech in this post. thanks

[Valra Bellkeys]

Hi all.. i was just wondering if anybody would know here.. where to get both stators and rotors of a castle castings siren repaired at ?.. as currently i have no clue where to go with them to get them repaired/repainted a little and put back into shape.. any help would be appreciated ?... also wanted to show the early warning wb1401 and WB1400 speech in this post. thanks

Not sure where you can get it repaired, but there is a great page on Facebook called "Castle Castings Siren", and they could perhaps point you in the right direction.

https://www.facebook.com/CastleCastingsSiren/

[thebreadmister]

thank you for the reply.. i already like the castle castings page but wouldnt know if he could repair the stators/rotors or such or get them someone to repair them.. and im not sure where to go locally.. also.. i would've added more photos and the parts of the early warning sytem i own.. but not good with photos on here apparently haha. thank you again

[Westgate Thunderbolt]

What kind of repair are we talking about? I don’t think you mentioned.

[thebreadmister]

The actual stators/rotors are what need repair work doing on them

[Tyler]

The actual stators/rotors are what need repair work doing on them

So I'm assuming they are cracked?

[Westgate Thunderbolt]

That’s what I was trying to find out.

[Chem_Boffin_6589]

Hi all.. i was just wondering if anybody would know here.. where to get both stators and rotors of a castle castings siren repaired at ?.. as currently i have no clue where to go with them to get them repaired/repainted a little and put back into shape.. any help would be appreciated ?... also wanted to show the early warning wb1401 and WB1400 speech in this post. thanks

Cracks in the castings will be repaired by any wheel repair and foundries if I remember correctly.

It's also great you actually have the WB-1401 and carrier receiver set that activated it back in the day. I seriously like that sort of stuff.

[thebreadmister]

i have only just seen these replyies now.. i am sorry about that. the 10 port stator is missing a piece and near that same damaged part it is bent.. the 12 port stator is simply bent somewhat.. however i think somehow.. either both the 10 and 12 port rotors arent even anymore.. or the metal rod (i forget the correct name) is bent that holds each side.. itll be a lot of work and im stuggling on where to go with this siren for repairs.. however wheel repair and foundries though ??.. and thanks!.. im very lucky i got them.. both a WB1401 and a WB1400 speech receiver.. they were used as part of the early warning system in the 80s up untill the somepoint in the 90s.. 1992 i think.. however my town/city still used them up until 1996

[Westgate Thunderbolt]

So, you are saying the motor shaft is bent?