"Measurements"

[flyonby13]

Could it be possible if any one can get the measurements of the following on a thunderbolt?

1. Rotators housing.
2. Blower housing.
3. rcm3 control box.
4. And other things like that.

It will help a lot. Thanks!!

[murrfarms]

Here's the measurements I got from my 1003 (which pretty much match up to the ones given in the manual):

(L x W x H)
Rotator: 22" x 15" x 36"
Blower: 56" x 33" x 30"
RCM-1/RCM-3: 27" x 19" x 9"
Horn: 55" x 28" x 28"
Solenoid Assy.("Bowtie" for 1003): 24" x 5" x 4.5"


Let me know if you need any more measurements!

[flyonby13]

is the H of the rotator include the chopper? if so what is the H of the rotator box?

[murrfarms]

Yes, that was including the chopper height with the rotator box height. I also forgot to put on there that the chopper is also about 10" in diameter.

[flyonby13]

I am still confused about the rotator box's measurements.

What are the measurements of the 4 lines on the picture below.

[JasonC]

I am still confused about the rotator box's measurements.

What are the measurements of the 4 lines on the picture below.

There are two different measurements for the 1000 and 1003 models. The manual also has the measurements.

[500 AT fan]

The rotator box for the 1003 is 3" taller than the 1000/T one.



Hope that helps!

[flyonby13]

well the reason i am asking is that i am trying to make a model of a thunderbolt 1000 or 1000T. and the manual has the measurements including the chopper housing and i am only wanting the height of the rotator box.

[CDV777-1]

1 is 24"
2 is 13"
3 is 12"
4 is 14"
These are 1000 box measurements.

Ohhhh. My Karma came down another point. Whoopie!
It's down to 12 now. Maybe this post will get it down another notch.

[Volodia07]

Like a HO scale one? If so I would pay handsomely for one. I would do it myself, however me and really tiny things don't get along.