picture of the huge dent on the side of the housing. Note the piece of baling wire that is wrapped around the bolts. Apparently that was some sort of mounting system (and probably why this thing had so many dents in it).
![Image](http://farm4.static.flickr.com/3292/2531724313_f1ecce0b10_o.jpg)
The intake shroud, pretty straight but far from being shiny.
![Image](http://farm3.static.flickr.com/2349/2531726477_d62c5c50aa_o.jpg)
one piece motor and stator design.
![Image](http://farm4.static.flickr.com/3032/2532540708_328c97cd18_o.jpg)
and now for the finished product,
![Image](http://farm3.static.flickr.com/2343/2519218432_9e33bfe4b6_o.jpg)
![Image](http://farm4.static.flickr.com/3023/2519214834_1797d32d3c_o.jpg)
![Image](http://farm3.static.flickr.com/2237/2518395883_7a68ef89d5_o.jpg)
Shot of the ID tag
![Image](http://farm3.static.flickr.com/2169/2519212156_f5a5c5dee5_o.jpg)