User avatar
flyonby13
Registered User
Registered User
Posts: 53
Joined: Mon May 29, 2006 8:03 pm
Location: Tri-City's Washington

Can someone ID this?

Tue Aug 15, 2006 9:42 pm

-Nathan-

User avatar
3t22
Registered User
Registered User
Posts: 802
Joined: Mon May 15, 2006 4:48 am
Real Name: Dan Drega
YouTube Username: federal3t22
Location: Vernon CT
Contact: YouTube

Tue Aug 15, 2006 10:29 pm

that is a Federal B coded siren. There's been a few ads for this siren posted on ebay.

User avatar
Trey
Registered User
Registered User
Posts: 1464
Joined: Tue May 16, 2006 3:14 am
YouTube Username: SD10s4ever
Location: Slaton, TX
Contact: YouTube

Tue Aug 15, 2006 10:55 pm

I believe this is one of the many ads:
Image

User avatar
loudmouth
Registered User
Registered User
Posts: 599
Joined: Thu May 18, 2006 3:30 am
Location: Haverhill MA
Contact: Website

Tue Aug 15, 2006 11:34 pm

code system? do they mean like how long the siren sounds or dose it have a damper to make code?

User avatar
Daniel
Registered User
Registered User
Posts: 4086
Joined: Sat Jun 03, 2006 3:37 am
Location: Beautiful eastern Oregon

Wed Aug 16, 2006 5:12 am

Where's the other half of the siren in the photo? There are three ways that I know of to stop a large siren's sound quickly for the purpose of coding. Dampers were used by Federal/Fedelcode and Klaxon, brakes were used by Sterling, and electrically reversing the motor was apparently used on some Allertors. I don't know how this particular siren did it, but I don't see where a damper could fit.
Last edited by Daniel on Sun Aug 27, 2006 6:38 pm, edited 1 time in total.

Robert Gift
Registered User
Registered User
Posts: 2857
Joined: Sat Jun 03, 2006 2:22 am
Location: Denver, CO

Thu Aug 17, 2006 11:17 pm

What is the purpose of coding?

I would think dampers would be the only way to do it.
Braking is difficult and reversing seems too slow, unless I am missing thentire point.
Thank you,

User avatar
Trey
Registered User
Registered User
Posts: 1464
Joined: Tue May 16, 2006 3:14 am
YouTube Username: SD10s4ever
Location: Slaton, TX
Contact: YouTube

Thu Aug 17, 2006 11:34 pm

robert gift wrote:What is the purpose of coding?

I would think dampers would be the only way to do it.
Braking is difficult and reversing seems too slow, unless I am missing thentire point.
Thank you,
Well I can see it for fire calls and stuff like here in the U.S. and I believe in Britain they use the "pulsed" code for a "Gray Warning" which is related to an air attack.

Jim_Ferer
Registered User
Registered User
Posts: 1130
Joined: Mon May 22, 2006 11:45 am
Location: Darien, CT

Fri Aug 18, 2006 1:42 am

robert gift wrote:What is the purpose of coding?

I would think dampers would be the only way to do it.
Braking is difficult and reversing seems too slow, unless I am missing thentire point.
Thank you,
In the days when alarms were transmitted by telegraph, fire departments used to transmit alarms by box numbers which corresponded to the number of the pull box on the street corner. In days of yore the first alarm would go to the corner where the box was and look around for the fire. Someone calling an alarm in may even be told to go to the box to guide the firemen.

The Fire Department of New York still uses box numbers, even though everything is automated now. Number One World Trade Center was Box 8-0-8-7, and Number Two was Box 9-9-9-8.

So a 'code' siren could sound out a box number. I don't see any place where there would be dampers on the Federal Code Siren in the ad.

User avatar
flyonby13
Registered User
Registered User
Posts: 53
Joined: Mon May 29, 2006 8:03 pm
Location: Tri-City's Washington

Sun Aug 20, 2006 12:08 am

thanks!!
-Nathan-

Justin
Registered User
Registered User
Posts: 1606
Joined: Tue May 16, 2006 6:41 am

Sun Aug 27, 2006 7:38 am

I believe in Britain they use the "pulsed" code for a "Gray Warning" which is related to an air attack.
Grey was for fallout while Black was for direct attack?

Return to “Main Outdoor Warning Sirens Board”

Who is online

Users browsing this forum: Bing [Bot] and 88 guests