Page 3 of 4
Re: Federal 550-AT Naming Convention
Posted: Tue Aug 07, 2018 1:55 am
by nvanw27
Tyler wrote: ↑Mon Aug 06, 2018 6:08 pm
Phone Goat wrote: ↑Mon Aug 06, 2018 5:44 pm
FahmiRBLX wrote: ↑Mon Aug 06, 2018 4:01 pm
And don't forget Dundee Twp's. The healthiest, albeit rotates fast, I've ever seen.
Dundee's has been removed. It now (according to Harman) in a garden.
Dundee's is still up, but it's at another location and is now a lawn decoration.
So it’s not active? And what’s The new location? For my MI map
Re: Federal 550-AT Naming Convention
Posted: Tue Aug 07, 2018 6:12 am
by Synther
Right in front of Dundee's new fire department just north of town.
820 Dundee Azalia Rd, Dundee, MI 4813
- 25659945_10208305083264982_5588661665806284631_n.jpg (88.66 KiB) Viewed 3768 times
(Photo Credit: Calvin Mayer)
Re: Federal 550-AT Naming Convention
Posted: Tue Aug 07, 2018 11:22 am
by nvanw27
Synther wrote: ↑Tue Aug 07, 2018 6:12 am
Right in front of Dundee's new fire department just north of town.
820 Dundee Azalia Rd, Dundee, MI 4813
25659945_10208305083264982_5588661665806284631_n.jpg
(Photo Credit: Calvin Mayer)
Thanks for the info. I look forward to seeing that soon, even tho it's inactive
Re: Federal 550-AT Naming Convention
Posted: Thu Aug 09, 2018 7:31 am
by FahmiRBLX
Synther wrote: ↑Tue Aug 07, 2018 6:12 am
Right in front of Dundee's new fire department just north of town.
820 Dundee Azalia Rd, Dundee, MI 4813
25659945_10208305083264982_5588661665806284631_n.jpg
(Photo Credit: Calvin Mayer)
No wires to it. Sad to see this beast silenced (At least for now)
Re: Federal 550-AT Naming Convention
Posted: Thu Aug 09, 2018 10:44 pm
by 500AT
FahmiRBLX wrote: ↑Mon Jul 30, 2018 10:09 am
...while the second run was in the mid-1960s with improved sound projectors.
So the on in Callahan, CO is the 1st Gen, isn't it?
Yes it is.
Any pictures of the second manufacturing run aka the 2nd Gen?
I believe at one time there was a photo of one of these sirens in St. Louis, Missouri floating around on this site.
Re: Federal 550-AT Naming Convention
Posted: Thu Aug 09, 2018 10:58 pm
by 500AT
Synther wrote: ↑Tue Aug 07, 2018 6:12 am
Right in front of Dundee's new fire department just north of town.
820 Dundee Azalia Rd, Dundee, MI 4813
25659945_10208305083264982_5588661665806284631_n.jpg
(Photo Credit: Calvin Mayer)
I clearly remember the day when this siren was installed in the spring of 1970. We were told is was going to be used for Civil Defense purposes, especially for Tornado Watches and Warnings. When it went off, a sense of fear overtook everyone because we knew it was for pending emergency, and not a regular fire/rescue call. The fun part was hearing this siren run in attack (tornado warning) mode, and the fire siren cycling over and over. It made for a very eerie tri-tone sound.
Re: Federal 550-AT Naming Convention
Posted: Fri Aug 10, 2018 2:55 am
by Synther
Adam Pollak wrote: ↑Wed Dec 21, 2011 1:26 pm
Guess I need to check in more often! Here is the pic of the siren. While a dual-head rotating one, it doesn't look like traditional 550s. The antenna mast there obviously means it hasn't rotated in a while either. it was removed probably 5 years ago from Pattonville-Bridgeton Sta #1.
Re: Federal 550-AT Naming Convention
Posted: Fri Aug 10, 2018 4:33 am
by Tyler
Not entirely sure that's a 550. That just doesn't look like a Federal product of the time. The thing looks pretty small too, which does not match the characteristics of the normal 500 and the familiar 550 we all know.
Re: Federal 550-AT Naming Convention
Posted: Fri Aug 10, 2018 4:38 am
by Synther
The bottom of that rotator mechanicsm looks similar to the one used in the Federal 500SHST.
Re: Federal 550-AT Naming Convention
Posted: Fri Aug 10, 2018 4:39 am
by Tyler
Synther wrote: ↑Fri Aug 10, 2018 4:38 am
The bottom of that rotator mechanicsm looks similar to the one used in the Federal 500SHST.
I fail to see a resemblance.