Post Reply
keith-uk
 
Posts: 5
Joined: Tue Apr 05, 2011 1:24 pm

Sterling

Tue Apr 05, 2011 8:38 pm

Hi all, I'm having a go at doing up an old Sterling siren.
Its not in very good condition and its a long way from home, but it works.
As far as I can tell its a model 12?
The horn itself has some bad cracks and has lost most of its zinc plating, so I have taken it all back to the brass.
I could re-plate but not with so many cracks.
The badge has, 6-v, type E and serial No and the maker.
keith-uk
 
Posts: 5
Joined: Tue Apr 05, 2011 1:24 pm

Wed Apr 06, 2011 7:05 am

Ok, a couple of questions.
As the siren is a type E, is it for use on a vehicle and second, how was it controlled, was it just a switch?
Thanks.
User avatar
Mac
Registered User
Registered User
Posts: 706
Joined: Mon Dec 07, 2009 2:52 pm
Location: Durham, NC

Wed Apr 06, 2011 3:41 pm

I don't know about being type E, but I would be confident betting on it being vehicular based on it being 6v and zinc plated.

Again I don't know the answer to this one either, but from my experience, I would say it would be operated by a momentary switch, very similar to that of an old head-light-switch. Most likely operated by the passenger. (Thats pretty standard for Fire and Military, I don't know about Police...)

Photos??
Sterling M-5, Sterling Mechanical Siren Timer, Federal Electric Co. Type B, Federal C3 1/2, Secomak VS1, Federal Type A (Coded & Standard), AF Timer, various other sirens \ controls
keith-uk
 
Posts: 5
Joined: Tue Apr 05, 2011 1:24 pm

Wed Apr 06, 2011 4:18 pm

You may not like the paint job, just put together for photo.

Image
Image
Image


Hope that helps.
User avatar
Mac
Registered User
Registered User
Posts: 706
Joined: Mon Dec 07, 2009 2:52 pm
Location: Durham, NC

Wed Apr 06, 2011 6:33 pm

What a beautiful siren! I can't wait to see how you finish it. Definitely a vehicle siren.
Sterling M-5, Sterling Mechanical Siren Timer, Federal Electric Co. Type B, Federal C3 1/2, Secomak VS1, Federal Type A (Coded & Standard), AF Timer, various other sirens \ controls
keith-uk
 
Posts: 5
Joined: Tue Apr 05, 2011 1:24 pm

Wed Apr 06, 2011 7:17 pm

Thanks, I had to do something with the horn as it had too many cracks, so the easy way out was to black enamel the damaged part, it may not be as it should, but it's a nice piece and may sound better when finished.
The rest will be buffed up and then a clear enamel coat applied.
I think it may be missing a mesh from inside the horn, but I should be able to make something up.
User avatar
SirenMadness
Registered User
Registered User
Posts: 3757
Joined: Mon May 15, 2006 2:47 pm
Location: Windsor, Ontario
Contact: Website

Thu Apr 07, 2011 4:53 am

I think the black enamel really complements the brass. :)
~ Peter Radanovic
keith-uk
 
Posts: 5
Joined: Tue Apr 05, 2011 1:24 pm

Mon Apr 18, 2011 5:04 pm

First test, one handed so not that good, but it sounds ok.


Youtube http://www.youtube.com/watch?v=0UWWXo6fAio
Last edited by keith-uk on Sun May 22, 2011 2:01 pm, edited 1 time in total.
User avatar
Oldiesmann
Registered User
Registered User
Posts: 1656
Joined: Tue Jul 29, 2008 3:59 pm
Real Name: Michael Eshom
YouTube Username: Oldiesmann
Location: Cincinnati, Ohio
Contact: Website Facebook Twitter

Mon Apr 18, 2011 7:36 pm

keith-uk wrote:First test, one handed so not that good, but it sounds ok.
Image
Wow. That thing has a really high pitch! (Note to everyone else: click on the photo to view the video).
Michael "Oldiesmann" Eshom
SMF
User avatar
Mac
Registered User
Registered User
Posts: 706
Joined: Mon Dec 07, 2009 2:52 pm
Location: Durham, NC

Mon Apr 18, 2011 10:32 pm

I guess that pitch makes sense with all those ports...but what a whinny little siren! ...I like it.
Sterling M-5, Sterling Mechanical Siren Timer, Federal Electric Co. Type B, Federal C3 1/2, Secomak VS1, Federal Type A (Coded & Standard), AF Timer, various other sirens \ controls
Post Reply

Return to “Other Warning Systems - Indoor, Outdoor and Vehicular”

Who is online

Users browsing this forum: No registered users and 30 guests