The Siren Board

I have obtained a factory copy of the schematic wiring diagram for the Chrysler air raid siren. It is a large page. Contact me if you would be interested in obtaining a copy.

Sure! My browser takes forever and a half to display large files, but if you're willing to email it to me, my address is: [email protected]

I was just going to have it printed off. I guess it doesn't matter though. Either way it would have to be scanned. It is a large page. I will have to take it to a place that can scan it.

Does your printer have a copy deck on top? If so, it most likely has scanner software. Mine does.

FS-Thunderbolt-Man wrote:Does your printer have a copy deck on top? If so, it most likely has scanner software. Mine does.

I think he's talking about a piece of paper MUCH larger than any home printer could handle.

RyanJamesDean98 wrote:I think he's talking about a piece of paper MUCH larger than any home printer could handle.

Correct. The print is about four times larger than an 8-1/2" by 11" page.

Westgate Thunderbolt wrote:

RyanJamesDean98 wrote:I think he's talking about a piece of paper MUCH larger than any home printer could handle.

Correct. The print is about four times larger than an 8-1/2" by 11" page.

If you ever get it scanned, I would like a digital copy to make an actual copy locally for a wall in my workshop.

Oh. I thought it was just in a manual. Is it one of those blue-print sheets that need to be ROLLED for storage?

i have one

FS-Thunderbolt-Man wrote:Oh. I thought it was just in a manual. Is it one of those blue-print sheets that need to be ROLLED for storage?

Any reference to blue prints and this always comes to mind...from 3 mins 20 secs to 3 mins 50 secs.



https://www.youtube.com/watch?v=DZ8D-bnwBK0