P-15 question
Posted: Sat Nov 01, 2014 11:34 pm
Hi guys, I have begun breaking down my P-15, and I need to know how to get the fiberglass pice off of the bottom:
How does this come off?
How does this come off?
The Siren Board
Discussion of Outdoor Warning Systems
https://www.airraidsirens.net/forums/
P-15 question
Page 1 of 1
Re: P-15 question
Posted: Sun Nov 02, 2014 12:02 am
One of the experts could answer this better than I could but I believe you either have to unscrew the whole assembly or take a tool to that little bolt up there... You may even have to tap it out? Been a long time since I have laid eyes on a penetrator...
Re: P-15 question
Posted: Sun Nov 02, 2014 10:27 pm
EDIT: found out how to get it off.
Re: P-15 question
Posted: Sun Nov 02, 2014 10:52 pm
Please enlighten if you will.stormsetter4 wrote:EDIT: found out how to get it off.
Re: P-15 question
Posted: Sun Nov 02, 2014 11:01 pm
You have to remove the bearing at the top, the collector rings and the bearing at the bottom. The bearing on the bottom was a PITA.coastalsyrolover wrote:Please enlighten if you will.stormsetter4 wrote:EDIT: found out how to get it off.
Re: P-15 question
Posted: Tue Nov 04, 2014 5:02 am
Ahhhh... Yes.... The good old PITA bearing.The bearing on the bottom was a PITA
A very common type of bearing found in old sirens or other old machines with bearings for that matter....
Plenty of PITA bolts out there too...
Re: P-15 question
Posted: Tue Nov 04, 2014 5:32 am
CDV777-1 wrote:Ahhhh... Yes.... The good old PITA bearing.The bearing on the bottom was a PITA
A very common type of bearing found in old sirens or other old machines with bearings for that matter....
Plenty of PITA bolts out there too...
Very true.