Stratob377
New User
Posts: 3
Joined: Sat Aug 13, 2022 3:16 pm

Writing blueprints (or close) federal signal 3t22 rc6a-480

Tue Aug 16, 2022 10:43 pm

Good evening everybody. I'm in search of a better wiring diagram for this siren. I have a 33 page manual from fs, but I'm looking for a more in depth diagram showing values and such. Contacted fs, they did give us the 33pg manual but it covers 6 models (kindof like an old Chiltons manual). Looking for more specific.

Appreciate it greatly

Aaron

matthewwatson
Registered User
Registered User
Posts: 132
Joined: Thu Nov 21, 2019 4:59 pm
Real Name: matthew
YouTube Username: matt makes machines
Discord: matthew watson#6542
Location: springville utah
Contact: YouTube

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Thu Aug 18, 2022 3:32 am

what specific siren?
Creator of electronic toneset library (pm for details)
owner of an FCH, 2 UVs and a UV+, electrovoice 848A, MCP A400W amp, 2 200w drivers, and many home made 3D printed sirens
Future owner of an whelen vortex R3 with an ESC-2020

matthewwatson
Registered User
Registered User
Posts: 132
Joined: Thu Nov 21, 2019 4:59 pm
Real Name: matthew
YouTube Username: matt makes machines
Discord: matthew watson#6542
Location: springville utah
Contact: YouTube

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Thu Aug 18, 2022 3:35 am

here's the 3t22 manual https://drive.google.com/file/d/1PDZkIR ... sp=sharing

the RC6-480 wiring is on page 22

I maintain a 3t22 in Mapleton Utah so i have a lot of experience with this model of siren
so if you have any more questions you can pm me
Creator of electronic toneset library (pm for details)
owner of an FCH, 2 UVs and a UV+, electrovoice 848A, MCP A400W amp, 2 200w drivers, and many home made 3D printed sirens
Future owner of an whelen vortex R3 with an ESC-2020

Stratob377
New User
Posts: 3
Joined: Sat Aug 13, 2022 3:16 pm

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Sun Sep 11, 2022 4:27 am

Its 208/240 system. Sorry for the confusion. We are looking for help in trying to hook this back up to the tone pager system.

matthewwatson
Registered User
Registered User
Posts: 132
Joined: Thu Nov 21, 2019 4:59 pm
Real Name: matthew
YouTube Username: matt makes machines
Discord: matthew watson#6542
Location: springville utah
Contact: YouTube

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Mon Sep 12, 2022 2:06 am

i can help you out with the paging system
Creator of electronic toneset library (pm for details)
owner of an FCH, 2 UVs and a UV+, electrovoice 848A, MCP A400W amp, 2 200w drivers, and many home made 3D printed sirens
Future owner of an whelen vortex R3 with an ESC-2020

Stratob377
New User
Posts: 3
Joined: Sat Aug 13, 2022 3:16 pm

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Sat Oct 22, 2022 3:25 pm

Hi Matt. Sent you an email. I would like to post pictures on this board of our 3t22 but its proving difficult with the constraints they setup for new members. We were working on this last night for a bit and we are only getting 122vac from the bottom buss bar. Trying to figure where the other wire goes to, to get the 208 the coil is looking for to activate the relay.
Part 2 to this, is we have a bunch of extra startup/shutdown relays that were added to make the 3t22 only make 1 round of noise and not 3 rounds like the fiber-wheel has cutouts for.

Return to “Community Systems”

Who is online

Users browsing this forum: No registered users and 7 guests