Page 1 of 1

Writing blueprints (or close) federal signal 3t22 rc6a-480

Posted: Tue Aug 16, 2022 10:43 pm
by Stratob377
Good evening everybody. I'm in search of a better wiring diagram for this siren. I have a 33 page manual from fs, but I'm looking for a more in depth diagram showing values and such. Contacted fs, they did give us the 33pg manual but it covers 6 models (kindof like an old Chiltons manual). Looking for more specific.

Appreciate it greatly

Aaron

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Posted: Thu Aug 18, 2022 3:32 am
by matthewwatson
what specific siren?

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Posted: Thu Aug 18, 2022 3:35 am
by matthewwatson
here's the 3t22 manual https://drive.google.com/file/d/1PDZkIR ... sp=sharing

the RC6-480 wiring is on page 22

I maintain a 3t22 in Mapleton Utah so i have a lot of experience with this model of siren
so if you have any more questions you can pm me

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Posted: Sun Sep 11, 2022 4:27 am
by Stratob377
Its 208/240 system. Sorry for the confusion. We are looking for help in trying to hook this back up to the tone pager system.

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Posted: Mon Sep 12, 2022 2:06 am
by matthewwatson
i can help you out with the paging system

Re: Writing blueprints (or close) federal signal 3t22 rc6a-480

Posted: Sat Oct 22, 2022 3:25 pm
by Stratob377
Hi Matt. Sent you an email. I would like to post pictures on this board of our 3t22 but its proving difficult with the constraints they setup for new members. We were working on this last night for a bit and we are only getting 122vac from the bottom buss bar. Trying to figure where the other wire goes to, to get the 208 the coil is looking for to activate the relay.
Part 2 to this, is we have a bunch of extra startup/shutdown relays that were added to make the 3t22 only make 1 round of noise and not 3 rounds like the fiber-wheel has cutouts for.