Page 1 of 1
B&M Sirens
Posted: Sun Aug 25, 2024 12:37 am
by Blazer51
Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.
Re: B&M Sirens
Posted: Mon Aug 26, 2024 12:59 pm
by PelicanStateSirens
Blazer51 wrote: ↑Sun Aug 25, 2024 12:37 am
Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.
Can you get the dimensions for the SuperChief?
Re: B&M Sirens
Posted: Thu Feb 13, 2025 3:18 pm
by fullsendersonly
Blazer51 wrote: ↑Sun Aug 25, 2024 12:37 am
Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.
I believe that the large siren that is at the bottom of the photo is one of the only other photos documented of the one in Beaumont CA and Silver Springs NV! look at the ports and where the holes for screws were drilled previous to installation as seen in the photo below and the one on the original post.
Re: B&M Sirens
Posted: Thu Feb 13, 2025 3:20 pm
by KoreanCo
fullsendersonly wrote: ↑Thu Feb 13, 2025 3:18 pm
Blazer51 wrote: ↑Sun Aug 25, 2024 12:37 am
Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.
I believe that the large siren that is at the bottom of the photo is one of the only other photos documented of the one in Beaumont CA and Silver Springs NV! look at the ports and where the holes for screws were drilled previous to installation as seen in the photo below and the one on the original post.
it's there.
https://maps.app.goo.gl/itdxYwsxipuyEd9XA
Re: B&M Sirens
Posted: Thu Feb 13, 2025 3:29 pm
by fullsendersonly
KoreanCo wrote: ↑Thu Feb 13, 2025 3:20 pm
fullsendersonly wrote: ↑Thu Feb 13, 2025 3:18 pm
Blazer51 wrote: ↑Sun Aug 25, 2024 12:37 am
Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.
I believe that the large siren that is at the bottom of the photo is one of the only other photos documented of the one in Beaumont CA and Silver Springs NV! look at the ports and where the holes for screws were drilled previous to installation as seen in the photo below and the one on the original post.
it's there.
https://maps.app.goo.gl/itdxYwsxipuyEd9XA
there used to be one in Beaumont (total of 4 in CA) and the one in silver springs Nevada which I now own.
Re: B&M Sirens
Posted: Sun Mar 30, 2025 4:04 am
by Fletch
One of these was still standing in Redington Shores, FL, in the '90s. I think it was a 20AR10. It was removed at some point.