Sirendipity
 
Posts: 7
Joined: Wed Aug 23, 2006 5:45 pm

Identify This Siren

Wed Aug 23, 2006 6:24 pm

Here's another interesting siren from the Historical US Archive:


http://www.airraidsirens.com/images/corbis3.jpg


This bohemoth terrorized New York city between 1950 and around 1978 when they were removed. There were very few of them, perhaps 25.

The rest of the 741 sirens NYC operated were all much smaller

Who built them? I have only seen them in New York City, no place else.

They did rotate, they climbed to a pitch of around 440 Hz.

They were mostly mounted on very tall buildings, which actually cut down their range somewhat.

User avatar
Rheems1
Registered User
Registered User
Posts: 1017
Joined: Sat Jun 03, 2006 3:31 pm
Real Name: Dave Fritz
Location: Dover, Pa
Contact: Website

Wed Aug 23, 2006 6:36 pm

That is a HOR Super Sirex, it does rotate (unless the rotator is broken as appears to be common with them as they age) and is available in both dual tone and single tone. They are really, really big too!

Dave

Sirendipity
 
Posts: 7
Joined: Wed Aug 23, 2006 5:45 pm

Wed Aug 23, 2006 8:12 pm

How did they rotate?

Did it have an additional motor for rotation, or did the centrifugal force rotate it by itself?

Does it have two siren motors, one for each side, or only one in the center that rotates both shafts?

Is that the same as a Hormann siren?


Thank you,

Larry

User avatar
SirenMadness
Registered User
Registered User
Posts: 3749
Joined: Mon May 15, 2006 2:47 pm
Location: Windsor, Ontario
Contact: Website

Wed Aug 23, 2006 8:18 pm

One motor spins both rotors.

There is a separate motor for rotation of the siren head. If I'm not mistaken, the motor for that task is on the left side, on a length-based axis. So there must be a big gear connected to the siren head, inside that big circular base.
~ Peter Radanovic

Robert Gift
Registered User
Registered User
Posts: 2857
Joined: Sat Jun 03, 2006 2:22 am
Location: Denver, CO

Thu Aug 24, 2006 3:06 am

Nice photo. Thanks.

At first I thoughthe two cones were sound projecting horns.
Buthey aren't.

Why didn'they have the air enter the rotors from the inside (motor side) and have larger horns attached around the stators?

Seems that would have been much louder and sent less sound skyward.
But that roof probably reflected a lot downwards, too.
I bet it is nothere just for weather protection but also sound reflection.

Where are these sirens now? All scrapped?

Return to “Main Outdoor Warning Sirens Board”

Who is online

Users browsing this forum: Google [Bot] and 105 guests