Page 1 of 4
New CLM Siren Pic's
Posted: Fri Mar 27, 2009 1:11 am
by CLM*MAn
kmhksdfnhksndhs
Posted: Fri Mar 27, 2009 1:16 am
by ThunderboltFreak
Is the top vent the air intake?
Posted: Fri Mar 27, 2009 1:20 am
by CLM*MAn
I believe so but not quite sure because these sirens were barely used and hardly ever heard. Not alot of information about them
Posted: Fri Mar 27, 2009 1:24 am
by ThunderboltFreak
I think it functions like an allertor... with all the sound being projected out of the top vent while air is sucked into the front part of the projector.
Or sound being projected out of the front of the projector and air being sucked in the top vent. However the allertor functions, I'm sure this siren is the same.
Posted: Fri Mar 27, 2009 1:55 am
by tboltkid520
I believe the front "cone" operates like a normal siren, air intake in the center and sound projected through the outer part of the cone. The rear part is a separate rotor/stator, with the sound being projected out the top piece, and the intake being that small rectangular-looking thing slanting downward.
Posted: Fri Mar 27, 2009 1:57 am
by SirenMadness
ThunderboltFreak wrote:I think it functions like an allertor... with all the sound being projected out of the top vent while air is sucked into the front part of the projector.
Or sound being projected out of the front of the projector and air being sucked in the top vent. However the allertor functions, I'm sure this siren is the same.
The Allertor sucks air in from the front bell and blasts it out that snorkel. The CLM siren has two rotors; one at the front and one at the back. The front rotor has an intake inside that large projector, in a similar way to a Penetrator or a 500AT, though the shape is different. The back rotor works a little like that of an Allertor... you can even see it has its own intake at the back. Of course, the front projector and back snorkel have nothing to do with each-other, as there is a motor in between them.
Posted: Fri Mar 27, 2009 2:14 am
by SouthDakotaBoy2009
appears to me to be a dual drive, you can see the intake on bottom of the back...thing while the lager one what it is.
could this be a precursor to the Allertor & the MDs?
Nice pics

Posted: Fri Mar 27, 2009 2:45 am
by jerrylovessirens
Heres a cutaway diagram I made in MS Paint of what I THINK on how the CLM works
Keep in mind ive never seen inside of one!

Posted: Fri Mar 27, 2009 2:48 am
by CLM*MAn
The inside of the cone does look like that and i think your right but ive never heard one in person.
Posted: Fri Mar 27, 2009 2:49 am
by jerrylovessirens
I do know there was a cold-war radio PSA (public service announcemnt) that had the audio of a CLM in the background. It was dual tone.