Thunderbolt 1003- Pulse Wail

[EOWS1212man]

I am assuming it is for a fire call, no idea on a location. The signal timing is a little screwy. Please excuse the dog, even though it is kinda funny...



https://www.youtube.com/watch?v=THLWYUn5jf0

[sirendude2012]

Sounds like a stuck solenoid trying to do hi-lo.

[SirenMadness]

So trippy!

[gman 1]

The thunderbolt can be set do that.

[uncommonsense]

The thunderbolt can be set do that.

No joke.

But listen: there's only one tone when it pulses. Not two.

There's a stuck solenoid as its trying to do whatever it's doing.

[Tyler]

I don't know what's up with it but in the video you can clearly hear it in its regular open state, then when it winds up again the solenoid sticks again. If you ask me it sounds like a solenoid is having some issues and wanting to stay closed.

[Andys Live WX]

Sounds like one solenoid is pulsing while the other is always on during each cycle. The spring can't be broken because I hear it dual-tone on the wind downs. Never heard one do that before. I wonder if one of the toggle contacts on the flasher unit is stuck closed? Other than the one in Valley Springs, SD where one solenoid was not working at all.

[Mark N]

Boys Town, NE had a 3T22 that would have its damper slam shut upon starting, could be something like that.
As for location, the only place that comes to mind is Long Island, NY

[Tyler]

Sounds like one solenoid is pulsing while the other is always on during each cycle. The spring can't be broken because I hear it dual-tone on the wind downs. Never heard one do that before. I wonder if one of the toggle contacts on the flasher unit is stuck closed? Other than the one in Valley Springs, SD where one solenoid was not working at all.

No it only winds down in dual tone once early in the video, the rest is in the same tone that the one solenoid is producing.

[ver tum]

That thing sounds weird...Definitely has some damper issues...

Interesting how it sounds like the blower is pulsing too, even though it's not. The blower noise heard from that distance is actually caused by the pulses of air from the blower hitting the air from the chopper.