My model L!

[Valra Bellkeys]

Finally! My Model L came in! I will probably give it a small growl tomorrow if not a small blast!

Here is some pics!

IMG_0202.JPG (4.88 MiB) Viewed 8453 times

IMG_0199.JPG (6.47 MiB) Viewed 8453 times

IMG_0196.JPG (6.03 MiB) Viewed 8452 times

IMG_0198.JPG (5.02 MiB) Viewed 8452 times

[Synther]

Why not sound it off for New Years?

[Valra Bellkeys]

Why not sound it off for New Years?

Just got it, not sure if i can go to Home Depot for a wall Plug-in tonight.

[Valra Bellkeys]

Small update: I will be getting a wall plug later today, and if I can, I will upload a growl video. C:

[Chicagosiren-hunters]

Now I have always wondered why there are so many "base-less" Model L's on eBay/Craigslist/ect...still a nice aquisition!

[Valra Bellkeys]

It works! Happy new years! I know it is late new years day.. but heh, still was able to fire it on new years none of the less Have a happy 2016! Also, on another note, I went ALL THE WAY to Haskell, OK to get a chopper and a stator for a RSH-10, of course I did not know if it was a STH-10 or RSH-10 until I got it. I asked the guy selling it if the siren used horns, or a rotating plate, he said it used a Rotating plate. At that point my jaw dropped. Along with getting that I got a AR timer.



https://www.youtube.com/watch?v=l0q6z8xWwzU

[Valra Bellkeys]

Ok, so I decided to see what my Model L would sound like with the Intake covered.. It turned out to sound very similar to a Federal Q!



https://www.youtube.com/watch?v=INPRrAk-ttI

[Valra Bellkeys]

IMG_0511.JPG (7.37 MiB) Viewed 8311 times

IMG_0510.JPG (8.58 MiB) Viewed 8311 times

So, there is some siren nudity. Well, here is the issue. I'm using hot paper towels, but I CANNOT clean off all the other stuff, the darkened spots, just ALL the dirt and everything, how do I get all of that HARD stuff off?

[estokke09]

If you are going to repaint it have it bead or sandblasted, if you just want to remove the surface grime use Jungle Jake or even Windex may work.