Mini/3d Printed sirens

[Reactor Cat]

Any price estimate on the MK2?

BUUUURRRRPPP

back up for buisness/requests/spam/hate (e)mail.

im thinking ive gotten pretty proficient at the p1x/alertor platform. anyway in thinking about selling another siren. a single tone p15. my most powerful siren. 130db at 1 foot, and about as loud, and effective as a FS model 2t. it would be in either sentry 14v red, or grey, possibly cd yellow. i wanna say $5 extra for cd yellow, because I dont have much, and prolly will nee to buy more. maybe throw a controller in there as well. i wanna say $190 flat, with a v1-dc controller, siren in cd yellow, pole mount good for anything with a 90 degree edge. Im reavaluating my claim on local pickup only. i might put it on Ebay, but i prolly will prioritze local pickup customers first, if you know what i mean. 1st come, 1st served.

This is on custom made/order mini sirens in the for sale section

ok thank you for letting me know

[carolinasignalco]

time to make a mk2 p15

Any price estimate on the MK2?

Read....boy. $190 without shipping

[Reactor Cat]

time to make a mk2 p15

Any price estimate on the MK2?

Read....boy. $190 without shipping

Sorry. I thought that was for something else. My bad :l

[Banjo Z]

I did a thing for some reason..
1/12th scale mini Model 2 siren!

[StormanCharlie]

I did a thing for some reason..
1/12th scale mini Model 2 siren!

Does it actually function?

[carolinasignalco]

nice job!. put a 380 motor, and a little 6 port chopper in it. come to think i might do that as a one day build, since ive got a few 380s. ill make the files public, and ill make a single and dual tone

[Banjo Z]

I did a thing for some reason..
1/12th scale mini Model 2 siren!

Does it actually function?

sadly no, it is only the housing
also thanks for the like you too!

[carolinasignalco]

im gonna make a dual tone and single tone model 2. about as big as yours

[matthewwatson]

can you make a whelen wps-4004? it would be direct-wired like a real one you would just need an Arduino micro an Arduino Uno 4 pushbuttons a toggle switch and 5 microswitches for rotation.

you would have 2 microswitches for each direction in the home position these will be the microswitches A1andA2. then there will be 1 switch for each of the 3 other directions microswitches C-D.

program the occultation control with an Arduino micro so when the counterclockwise microswitch A1 is pressed it will rotate clockwise than when the clockwise microswitch A2 is pressed It will go counter-clockwise. shove the arduino micro in the rotator box for pretention. and now the siren will rotate back and forth like a real whelen.

then you would just wire the output of all 5 of the directional sensing switches to an easily accessible Arduino uno with the direction output for A1 and A2 wired together with diodes and 4 buttons wired for the north/B east/C south/D and west/A1-A2 directional controls. than a switch wired for normal on-off rotation toggle control. wire all 4 of the speakers to an amplifier and then you are all set to go and annoy some neighbors.

[carolinasignalco]

im either gonna do a 500 dhtt, or a t128. due to a recent loss of my other hobby, i will have. acrap ton of time to devote to 3d printing.

the t128 will be all magnet together, and usefull as a teaching aid, and have a coolness factor, becuae it comes apart.

the 500dhtt will prolly come 1st. it should be relaly interesting to hear from very far away