One thing I've been wondering is the ASC 400W amp and how its interfaced with the other 200W amps in the box.
Are those ASC amps just two-200W amps fused together in one box ala the Federal A100 found in the MCP or are they a full 400W amp? If its a full 400W, did you have any issues with powering it and interfacing it with the other 200W units? I own that I'm not an expert so it may be a dumb question but I wanted to learn a little bit here. FWIW, I'm guessing its a 2x200W based on how its wired.
Thanks!
-
Randomizer
- Registered User
- Posts: 77
- Joined: Sun Nov 28, 2021 6:01 am
-
NahIDee
- Registered User
- Posts: 245
- Joined: Sun Jul 23, 2017 2:00 am
- Real Name: Connor B
- YouTube Username: condb19
- Discord: somebody2950
- Location: St. Paul, Nebraska
- Contact: YouTube
Re: 1986 ACA Alertronic 6000R
As far as I know about them, they're two 200W amps in one box. They wire up the same and use the same harness/connector as a 200W amplifier.Randomizer wrote: ↑Tue May 28, 2024 2:09 pmOne thing I've been wondering is the ASC 400W amp and how its interfaced with the other 200W amps in the box.
Are those ASC amps just two-200W amps fused together in one box ala the Federal A100 found in the MCP or are they a full 400W amp? If its a full 400W, did you have any issues with powering it and interfacing it with the other 200W units? I own that I'm not an expert so it may be a dumb question but I wanted to learn a little bit here. FWIW, I'm guessing its a 2x200W based on how its wired.
Thanks!
Greetings from Saint Paul, Nebraska!
Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!
Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!
-
Randomizer
- Registered User
- Posts: 77
- Joined: Sun Nov 28, 2021 6:01 am
Re: 1986 ACA Alertronic 6000R
Thanks for the clarification!NahIDee wrote: ↑Tue May 28, 2024 5:23 pmAs far as I know about them, they're two 200W amps in one box. They wire up the same and use the same harness/connector as a 200W amplifier.Randomizer wrote: ↑Tue May 28, 2024 2:09 pmOne thing I've been wondering is the ASC 400W amp and how its interfaced with the other 200W amps in the box.
Are those ASC amps just two-200W amps fused together in one box ala the Federal A100 found in the MCP or are they a full 400W amp? If its a full 400W, did you have any issues with powering it and interfacing it with the other 200W units? I own that I'm not an expert so it may be a dumb question but I wanted to learn a little bit here. FWIW, I'm guessing its a 2x200W based on how its wired.
Thanks!
-
NahIDee
- Registered User
- Posts: 245
- Joined: Sun Jul 23, 2017 2:00 am
- Real Name: Connor B
- YouTube Username: condb19
- Discord: somebody2950
- Location: St. Paul, Nebraska
- Contact: YouTube
Re: 1986 ACA Alertronic 6000R
Done. Video coming soon.
- Attachments
-
- Back cover after repairs and sanding.
- 20240529_193714.jpg (341.92 KiB) Viewed 2420 times
-
- Completed Alertronic and control cabinet.
- 20240529_222135.jpg (435.93 KiB) Viewed 2420 times
-
- Back of the Alertronic after repainting.
- 20240530_185220.jpg (504.63 KiB) Viewed 2420 times
-
- Alertronic 6000R compared to a Whelen WS-3000 and a BN52 Mobil-Directo.
- 20240601_151812.jpg (920.95 KiB) Viewed 2420 times
Greetings from Saint Paul, Nebraska!
Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!
Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!
-
NahIDee
- Registered User
- Posts: 245
- Joined: Sun Jul 23, 2017 2:00 am
- Real Name: Connor B
- YouTube Username: condb19
- Discord: somebody2950
- Location: St. Paul, Nebraska
- Contact: YouTube
Re: 1986 ACA Alertronic 6000R
Here it is in action!
https://www.youtube.com/watch?v=P7yfWBUEKwQ
Here's also a few more pictures I took of it, back where it was where this whole project all began...
https://www.youtube.com/watch?v=P7yfWBUEKwQ
Here's also a few more pictures I took of it, back where it was where this whole project all began...
- Attachments
-
- 20240602_101810.jpg (1.51 MiB) Viewed 2416 times
-
- 20240602_101921.jpg (1.11 MiB) Viewed 2416 times
Greetings from Saint Paul, Nebraska!
Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!
Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!
-
ThatGuy2020
- Registered User
- Posts: 153
- Joined: Thu Jan 04, 2024 3:23 pm
- Real Name: Ash
- YouTube Username: TwinCities-SirensAndEAS
- Location: Minnesota
Re: 1986 ACA Alertronic 6000R
It did amazing during sirencon this year. I was there the evening before when it arrived and my dad said it was like Elvis had arrived 
I also saw it on the highway and I waved and gave a thumbs up at your car, since I wanted to say “Oi! Nice job with the siren!”
I also saw it on the highway and I waved and gave a thumbs up at your car, since I wanted to say “Oi! Nice job with the siren!”
Owner of 7 sirens, Including one of the two Pennington NJ Federal Electric Model 2s and a Model 2T
Along with 5 weather radios, 4 cassette players, and 5 CD players
She/Her/Hers 🏳️⚧️
Along with 5 weather radios, 4 cassette players, and 5 CD players
She/Her/Hers 🏳️⚧️
Return to “Main Outdoor Warning Sirens Board”
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot], SICentral and 22 guests