B&M Sirens

[Blazer51]

Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.

[PelicanStateSirens]

Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.

Can you get the dimensions for the SuperChief?

[fullsendersonly]

Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.

I believe that the large siren that is at the bottom of the photo is one of the only other photos documented of the one in Beaumont CA and Silver Springs NV! look at the ports and where the holes for screws were drilled previous to installation as seen in the photo below and the one on the original post.

[KoreanCo]

Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.

I believe that the large siren that is at the bottom of the photo is one of the only other photos documented of the one in Beaumont CA and Silver Springs NV! look at the ports and where the holes for screws were drilled previous to installation as seen in the photo below and the one on the original post.

it's there. https://maps.app.goo.gl/itdxYwsxipuyEd9XA

[fullsendersonly]

Very familiar with B&M Sirens and can answer questions if needed. Still in business and can rebuild and repair B&M sirens.
Just here to answer questions I have attached some photos. The black-and-white photo was found by Brian at the B&M factory and was originally in the 30s with Mr. Miles featured in the picture with models that were currently sold (M3 series) you can tell by the motor casing.

I believe that the large siren that is at the bottom of the photo is one of the only other photos documented of the one in Beaumont CA and Silver Springs NV! look at the ports and where the holes for screws were drilled previous to installation as seen in the photo below and the one on the original post.

it's there. https://maps.app.goo.gl/itdxYwsxipuyEd9XA

there used to be one in Beaumont (total of 4 in CA) and the one in silver springs Nevada which I now own.

[Fletch]

One of these was still standing in Redington Shores, FL, in the '90s. I think it was a 20AR10. It was removed at some point.