User avatar
MightyThunderbolt
 
Posts: 17
Joined: Tue May 16, 2006 2:23 am

Model 2T and other dual tone sirens

Fri May 19, 2006 4:01 am

Does anyone know why the Model 2 Siren no longer has the dual tone option? How long ago did they do away with it if they did? Are the thunderbolt 1000 T's and the Model 2 T's hard to come by? I thought of restoring one of the two, preferrably the thunderbolt 1000T. If one or the other cannot be found, is it possible to take a chopper from a model 2 T and put it in a thunderbolt 1000 in order to make it a T? I prefer the dual tone because of it's haunting effect.

User avatar
Archon
Registered User
Registered User
Posts: 1867
Joined: Mon May 15, 2006 12:37 pm
Real Name: Joe

Fri May 19, 2006 5:57 am

I got a 2T at it's date code was 1976 the same date code year as the 2T22 That I got with it

User avatar
SirenMadness
Registered User
Registered User
Posts: 3751
Joined: Mon May 15, 2006 2:47 pm
Location: Windsor, Ontario
Contact: Website

Fri May 19, 2006 7:11 pm

There is no more 2Ts being made because one port row left the other row slightly inefficient. And the ports were a lot smaller, height wise. That made the model 2T quieter than the Model 2. And it was also harder to manufacture a single chopper with two port rows.
Yes, 1000T models do have the choppers of the 2T range.
~ Peter Radanovic

User avatar
hobbeekid
Registered User
Registered User
Posts: 633
Joined: Thu May 18, 2006 5:43 pm
Location: Manteca Ca.

Sun May 21, 2006 5:29 pm

Archon wrote:I got a 2T at it's date code was 1976 the same date code year as the 2T22 That I got with it


Archon,

where did you find the date code on each siren? particularly your 2t22?? is it stamped on the motor housing somewhere? I could'nt find one.........

Robert Gift
Registered User
Registered User
Posts: 2857
Joined: Sat Jun 03, 2006 2:22 am
Location: Denver, CO

Sat Aug 19, 2006 1:36 am

Federal Signal said the date code I sent was meaningless - the 2t22s
did not have date codes.

If incorrect, I'd sure like to determine when our 2t22 was made.

Any ideas?

User avatar
Nelso90
Registered User
Registered User
Posts: 1025
Joined: Thu May 11, 2006 11:43 pm

Sat Aug 19, 2006 2:45 am

SirenMadness wrote:Yes, 1000T models do have the choppers of the 2T range.
Only some 1000T's have that. A vast majority of 1000T's have the 5/6 port rotor.

Return to “Main Outdoor Warning Sirens Board”

Who is online

Users browsing this forum: NewEnglander1212 and 2 guests