User avatar
hobbeekid
Registered User
Registered User
Posts: 633
Joined: Thu May 18, 2006 5:43 pm
Location: Manteca Ca.

Sirens Struck by Lightning

Sun Aug 01, 2010 6:16 pm

Does anyone have photos of sirens rendered inoperable due to lightning strikes or other power surges? I'm curious as to what kind of damage is done to motors/windings,etc from power surges such as lightning. Sirens taken apart with physical damage, burned windings etc. Do any of these beasts exist? if anyone has stories/photos ,please list them here.This might make a good sticky.:)

Slick Rick
Registered User
Registered User
Posts: 50
Joined: Tue Mar 13, 2007 11:20 pm

Sun Aug 01, 2010 8:49 pm

I remember a few years ago a T-128 in North Omaha, Nebraska was struck by lightning and activated in attack mode. You could hear it loud and clear and it must have stayed on for 20+ minutes in continuous attack.

User avatar
coppercarl
Supporter
Supporter
Posts: 867
Joined: Sun Apr 19, 2009 5:34 pm
Real Name: Ian Tate
YouTube Username: TheWeatherGuys
Location: Indianapolis, Indiana
Contact: Website

Mon Aug 02, 2010 10:38 pm

Here is a video that Jeb (Blue10AEMia) posted on YouTube of a P-15 that was struck by lightning.

http://www.youtube.com/watch?v=2roGJ4YAruM
Ian Tate
Facebook

User avatar
Archon
Registered User
Registered User
Posts: 1867
Joined: Mon May 15, 2006 12:37 pm
Real Name: Joe

Tue Aug 03, 2010 3:05 am

The windings of my 2T22 I got from WSS The motor is toast all burnt up
Not going to be rewound either going to be junked. Both 2 3T22's motor's check out OK

Image

User avatar
Archon
Registered User
Registered User
Posts: 1867
Joined: Mon May 15, 2006 12:37 pm
Real Name: Joe

Tue Aug 03, 2010 4:47 am

I also had a 3T22 that had a Marathon motor on it that was struck by lighting it also took out one of the solenoids on the top damper it melted the solenoid and locked the damper in the open position it was really hard to get that damper and solenoid off.

User avatar
hobbeekid
Registered User
Registered User
Posts: 633
Joined: Thu May 18, 2006 5:43 pm
Location: Manteca Ca.

Fri Aug 06, 2010 7:41 pm

Wow Great stuff guys! Man! the damage that lightning can do.Depending on installation,like a wooden pole, if siren were properly grounded for lightning strikes do any of you think that damage like this can be averted ?Please keep the carnage coming!!!

Justin
Registered User
Registered User
Posts: 1606
Joined: Tue May 16, 2006 6:41 am

Sat Aug 07, 2010 2:18 am

hobbeekid wrote:if siren were properly grounded for lightning strikes do any of you think that damage like this can be averted
No, as the siren itself would still form a part of the circuit. The only way to avoid lightning strikes is to direct them away from the siren, either by surrounding landscape or by lightning rods.

User avatar
jerrylovessirens
Registered User
Registered User
Posts: 688
Joined: Mon May 15, 2006 12:08 pm
Location: Campbellsport, Wisconsin

Sun Aug 08, 2010 2:03 am

Archon wrote:I also had a 3T22 that had a Marathon motor on it that was struck by lighting it also took out one of the solenoids on the top damper it melted the solenoid and locked the damper in the open position it was really hard to get that damper and solenoid off.
I think I recall seeing this solenoid myself at Red Arrow Siren Services


It is quite bizzare what a bolt of lightning can do, bend around corners, touch one thing but not the others, blow wires but not breakers, weird stufff all in all.

User avatar
Tkjns
Registered User
Registered User
Posts: 74
Joined: Mon Jun 18, 2007 5:14 am
Location: Iowa
Contact: Website

Sat Aug 14, 2010 8:19 pm

Here's an Iowa City Press-Citizen article and a KCRG News story about a siren in North Liberty, IA which was struck by lightening the other day. It appears the strike caused the siren to activate then malfunction.

http://www.press-citizen.com/article/20 ... nado-siren

The KCRG story provides a picture as well.

http://www.kcrg.com/news/local/Lighteni ... 55554.html
Jake H.

der Papst
Registered User
Registered User
Posts: 42
Joined: Thu Aug 05, 2010 9:05 pm

Sun Aug 15, 2010 1:27 pm

I think this is the result of an indirect lightning strike (high voltage, high power pulse in the power supply).

The siren itself and its control box should be a faraday cage, so the current of the lightning strike should flow through the siren's metal case and the earth connection to the ground.
I'm sorry for mistakes in spelling/grammar, english is not my native language

Return to “Main Outdoor Warning Sirens Board”

Who is online

Users browsing this forum: Google [Bot], Semrush [Bot] and 13 guests