This is how it originally looked...
I wire wheeled the housing. I'm on budget so sandblasting wasn't really an option.
I primed and painted the housing. I used Rustoleum Sunburst yellow. It matches my Civil Defense survey meters very well. I also got (2) 3" Civil Defense decals for it that are on each side. I wish I was able to clean up the ID plate but I don't wanna ruin it.
I took apart the siren. It came apart fairly easily. I had to use an impact gun on the legs. I cleaned it up, primed and painted all the parts. I used gloss smoke gray and gloss black. The bearings were in good shape so I just repacked them.
Put the legs back together..
This is what it looks like now.. I used all new hardware
The siren with the intake cone. I still have to weld up the holes and paint it. I'll post pictures when I'm done with it.
Here's the siren next to the housing.
