The Siren Board

Well, it has been about 2 years or so since I put up my LK-145 so I figured I should pull it down and do some maintaince on it. Well after a near disaster getting it down, I have started working on it and have gotten the siren done so far. Now I have to work on the enclosure, pole, and supercharger. All of the paint on the top of the siren fell off so I need to paint it better this time. Anyways, Branden0925 is coming down tomorrow to help me finish cleaning it up and putting back in. So without further adue, here are the pictures:

The pole on the ground: (excuse the junk)


Unhooking the wiring:


The paint that is left on top of the siren:


The siren in the enclosure:


Tag:


Siren with one of the screens removed:


The motor:


The chopper:


If anybody doubts these are lion king sirens:


Siren after a little paint work:


Side:


Back:


That's it for now. I should have more pictures up tomorrow.

What is the diameter of the rotors?

Daniel wrote:What is the diameter of the rotors?

I will have to see tomorrow, they are pretty small.

What's been puzzling me in the first picture is the small box just below the housing. Is it a motor contact relay or something else? I'm thinking it's a relay because your ARCH panel had no means of visible relay inside. I wonder...I wonder....

Chem_Boffin_6589 wrote:What's been puzzling me in the first picture is the small box just below the housing. Is it a motor contact relay or something else? I'm thinking it's a relay because your ARCH panel had no means of visible relay inside. I wonder...I wonder....

That's a junction box. I have a 15 amp relay that is connected to my ARCH

Ah. Thanks!

stormsetter4 wrote:

Daniel wrote:What is the diameter of the rotors?

I will have to see tomorrow, they are pretty small.

I own one as well, the rotors are 6 inches each.

stormsetter4 wrote:

Daniel wrote:What is the diameter of the rotors?

I will have to see tomorrow, they are pretty small.

They are good for their price of about $145 on ebay.